Features

Rugged, One-Piece Enclosure
The welded, deep-formed frame is heavy gauge 302 stainless steel. It protects tube alignment from pipe strain and makes for easy assembly with minimum number of parts.

Positive Tube Seating, Easy Tube Removal

An external clamp locks the tube in place. An O-ring gasketed tube retainer gives positive tube, seating, and sealing (yet tube removal is quick and easy). The clamp is loosened, and the tube lifted out. There is no spring in the flow stream to foul or corrode. O-rings are the same size, minimizing the number of wearable spares.

Convenient to Connect
Horizontal end fittings rotate through 360 degrees. Piping can be brought in from any direction. End fittings for vertical connection are available also.

Size for Size, Greater Capacity, Less Cost
Varea-Meter® floats have their metering discs between the upper and lower bodies. The resultant short lower body permits greater pressure recovery and restricts flow less than other designs. This float design allows tubes to be made with a taper that gives low pressure drop plus high capacity for the tube, and size. Often a smaller Varea-Meter® unit can be specified for a given capacity at less cost.

Convenient Capacity Change
All viscosity-immune floats for any given-size tube have similar characteristic flow curves. Thus, capacity can usually be changed by changing the float only. The same percentage flow scale may be used and the meter will not lose its inherent accuracy of 2% of full scale.

520.100.000.PS.0324

Click the link below to access a PDF of the data sheet.