Features
Accurate Gas Metering
A snubber on the float causes readings to steady out quickly,
gives true readings down to atmospheric pressures.
Rugged Construction
316 stainless steel body with Buna N, TFE or SS O-rings gives corrosion resistance and reliable operation to 1500 psi (100 bar) and 800°F (427°C) (600°F (316°C) with flow switch). A heavy stainless sheath encloses
the scale tube, which is sealed at both ends by O-rings.
Built-In Backcheck
An O-ring at the top of the float seals against the seat to prevent
backflow through the meter.
Easy To Clean
A port in the bottom of the meter body makes cleaning easy.
Change Floats or Scales
To change capacity, a different float is inserted without removing the
meter from the line. Scale tubes have gallon and percent scales.
Either can be exposed by loosening a cap screw and turning the tube.
Powerful Magnetic Linkage
An indicating follower ring slides on the precision inside bore of the
scale tube. This low friction travel and a powerful bond between
the ring and the float magnet makes for immediate response to flow
changes.
510.200.000.PS.0324
Click the link below to access a PDF of the data sheet.