Designed for quick and easy installation, the DrumStik® adapter
greatly simplifies the connection of a new 55-gallon (208.2 L)
drum of emulsion polymer to the Polyblend® unit. This device
eliminates the need for hand feeding a length of tubing into the
drum and ensures maximum evacuation of the drum’s contents.
The DrumStik® adapter is designed for either a 2” (50.8mm) NPT
bung hole connection or a ¾” (19.05mm) NPT vent hole connection.
Simply remove the 2” (50.8mm) x ¾” (19.05mm) reducer bushing
if installing in the ¾” (19.05mm) NPT vent hole connection. The DrumStik® adapter is merely inserted in the appropriate drum hole and threaded hand-tight. A barbed connector at the top of the DrumStik® adapter is sized to accept the 5/8” (13.33mm) ID tubing from the Polyblend® unit’s diaphragm pump.
Use of the DrumStik® adapter also virtually eliminates
the need for re-priming the pump when changing drums.
Click the link below to access a PDF of the data sheet.